We're here to help

    Excella STX has a jam

    Follow

    Make sure that you are not scanning a thermal receipt

    1. Thermal receipt paper is too thin and slippery for the STX

     

    To clear the jam:

    1. Remove the outer cover from the STX
    2. Fold down the scan heads
      1. To do this, lift the tab on each scan head
      2. The scan head will only open a small amount
    3. Remove the jam if it is visible, remove it
    4. Use compressed air to clean out the scan path
    5. Fold the scan heads up and replace the outer cover
    Was this article helpful?
    0 out of 0 found this helpful

    Comments